ICG Navik & Yantrik Syllabus 2025: The article has covered the Indian Coast Guard Syllabus 2025 and Exam Pattern for the Navik and Yantrik positions. Candidates will find it easier to prepare with the ICG Navik & Yantrik Syllabus 2025.
ICG Navik & Yantrik Syllabus 2025, Exam Pattern & Detailed Syllabus
ICG Navik & Yantrik Syllabus 2025: Under the Ministry of Defense, the Indian Coast Guard (ICG) is the country’s marine law enforcement and search and rescue organization. The Indian Coast Guard’s main responsibility is to protect the nation’s maritime resources in all respects.
To fill the positions of Navik (General Duty), Navik (Domestic Branch), and Yantrikin in the Indian Coast Guard, the ICG administers the Indian Coast Guard Recruitment Exam. To properly prepare for the Indian Coast Guard exam, candidates interested in taking it should review the most recent ICG Navik & Yantrik Syllabus 2025.
ICG Navik & Yantrik Syllabus 2025 & and Exam Pattern
The first step in starting the preparation process is learning the Indian Coast Guard Syllabus 2025 for Navik and Yantrik. To familiarize themselves with the grading structure, maximum marks, and question format as stipulated by the commission, candidates should review the most recent Indian Coast Guard Syllabus and Exam Pattern 2025.
| Indian Coast Guard Syllabus 2025 | |
| Organization | Indian Coast Guard (ICG) |
| Exam Name | Indian Coast Guard Exam 2025 |
| Exam Level | National Level |
| Category | Syllabus |
| Type of Questions | Multiple Choice Questions |
| Mode of Exam | Online |
| Selection Process | Stage I – Computer Based Test Stage II- Assessment & Adaptability Test, Physical Fitness Test, Document Verification and Initial Medicals Examination Stage III- Document Verification and Final Medical Examination at INS Chilka Stage IV- The candidates will undergo training at INS Chilkaare. |
| Official Website | www.indiancoastguard.gov.in |
ICG Navik Syllabus 2025
The Indian Coast Guard Navik Syllabus 2025 details are shown in the table below for the candidates’ convenience.
Also Read: SSC GD Exam City 2025 Out at ssc.gov.in, check Here All Details
Indian Coast Guard Navik Syllabus 2025 (General Duty)
| Indian Coast Guard Navik Syllabus 2025 (General Duty) |
| Section I |
| Science – Nature of Matter, Universe (Planets / Earth / Satellites / Sun ), Electricity and its application, Force and Gravitation, Newton’s Laws Of Motion, Work, Energy and Power, Heat, Temperature, Metals and Non-Metals, Carbon and its Compounds, Measurements in Science, Sound & Wave Motion, Atomic Structure. Mathematics – Mathematical Simplification, Ratio and Proportion, Algebraic Identities, Linear Equations and Polynomials, Simultaneous Equations, Basic Trigonometry, Simple Mensuration, Geometry, Measures of Central Tendency (Average, Median and Mode), Interest, Profit, Loss and Percentage, Work, Time, Speed and Distance. English – Passage, Preposition, Correction of sentences, Change active to passive/passive to active voice, Change direct to indirect/indirect to direct, Verbs/Tense/Non Finites, Punctuation, Substituting phrasal verbs for expression, Synonyms and Antonyms, Meanings of difficult words, Use of adjectives, Compound preposition, Use of pronouns. General Awareness – Geography: Soil, Rivers, Mountains, Ports, Inland, Harbours, Culture and Religion, Freedom Movement, Important National Facts about India, Heritage, Arts and Dance, History, Defence, Wars and neighbours, Awards and Authors, Discoveries, Diseases and Nutrition, Current Affairs, Languages, Capitals and Currencies, Common Names, Full Forms and Abbreviations, Eminent Personalities, National Bird / Animal / Sport / Flower / Anthem / Song/ Flag / Mountains, Sports: Championships / Winners /Terms / Number of Players. Reasoning – Spatial, Numerical Reasoning & Associative Ability, Sequences, Spellings Unscrambling, Coding and Decoding |
Indian Coast Guard Navik Syllabus 2025 (General Duty)
| Indian Coast Guard Navik Syllabus 2025 (General Duty) |
| Section II |
| Physics Physical world and measurement, Kinematics, Laws of Motion, Work, Energy and Power. Newton’s laws and applications, circular motion. Motion of System of particles and rigid body, gravitation, Property of Bulk Matter, thermodynamics, behavior of perfect gas and kinetic theory, Oscillation and Waves. Electrostatics, Current Electricity, Magnetic Effects of current and magnetism, Electromagnetic Induction and alternating currents, Electromagnetic Waves. Optics, Dual Nature of matter and radiation, Atom and Nuclei. Electronic devices, Communicating systems. |
| Mathematics Sets, Relations and Functions – Set, Relations and Functions trigonometric functions. Algebra – Principle of Mathematical induction, complex numbers and quadratic equations, linear inequalities, permutation and combinations, binomial theory, sequence and series, Matrices, and determinants. Vector And Three Dimensional Geometry – Vectors, and three dimensional geometry Liner Programming Coordinate Geometry – Straight lines, conic section, introduction to three-dimensional geometry. Calculus – Limits and derivatives, Continuity and differentiability, Applications and derivatives, Integrals, applications of the integrals, differential equations. Mathematical Reasoning Probability – Statistics, Probability. Mathematical Simplification, Ratio and Proportion, Algebraic Identities, Linear Equations and Polynomials, Simultaneous Equations, Basic Trigonometry. Relations And Functions – Relations and Functions, inverse trigonometric functions. Simple Mensuration, Geometry, Measures of Central Tendency (Average, Median and Mode. |
Indian Coast Guard Navik Syllabus 2025 (Domestic Branch)
| Indian Coast Guard Navik Syllabus 2025 (Domestic Branch) |
| Section I |
| Science – Nature of Matter, Universe (Planets / Earth / Satellites / Sun ), Electricity and its application, Force and Gravitation, Newton’s Laws Of Motion, Work, Energy and Power, Heat, Temperature, Metals and Non-Metals, Carbon and its Compounds, Measurements in Science, Sound & Wave Motion, Atomic Structure. Mathematics – Mathematical Simplification, Ratio and Proportion, Algebraic Identities, Linear Equations and Polynomials, Simultaneous Equations, Basic Trigonometry, Simple Mensuration, Geometry, Measures of Central Tendency (Average, Median and Mode), Interest, Profit, Loss and Percentage, Work, Time, Speed and Distance. English – Passage, Preposition, Correction of sentences, Change active to passive/passive to active voice, Change direct to indirect/indirect to direct, Verbs/Tense/Non Finites, Punctuation, Substituting phrasal verbs for expression, Synonyms and Antonyms, Meanings of difficult words, Use of adjectives, Compound preposition, Use of pronouns. General Awareness – Geography: Soil, Rivers, Mountains, Ports, Inland, Harbours, Culture and Religion, Freedom Movement, Important National Facts about India, Heritage, Arts and Dance, History, Defense, Wars and neighbours, Awards and Authors, Discoveries, Diseases and Nutrition, Current Affairs, Languages, Capitals and Currencies, Common Names, Full Forms and Abbreviations, Eminent Personalities, National Bird / Animal / Sport / Flower / Anthem / Song/ Flag / Mountains, Sports: Championships / Winners /Terms / Number of Players. Reasoning- Spatial, Numerical Reasoning & Associative Ability, Sequences, Spellings Unscrambling, Coding and Decoding |
Indian Coast Guard Navik Exam Pattern 2025
Understanding the Indian Coast Guard Exam Pattern 2025, the kinds of questions that will be asked, and the marking system will help candidates organize their preparation in accordance with the exam pattern. In contrast to those who wish to apply for Navik GD, candidates who wish to apply for Navik DB positions must complete Section I (I+II).
| Indian Coast Guard Navik Exam Pattern 2025 | ||||
| Section | Subject | No. of Questions | Total Marks | Duration |
| Section I | Maths | 20 | 20 | 45 mins |
| Science | 10 | 10 | ||
| English | 15 | 15 | ||
| Reasoning | 10 | 10 | ||
| GK | 5 | 5 | ||
| Section II | Maths | 25 | 25 | 30 mins |
| Physics | 25 | 25 | ||
Indian Coast Guard Yantrik Syllabus 2025
The table below provides specifics of the Indian Coast Guard Yantrik Syllabus 2025. Candidates must be well aware of the exam’s syllabus subjects in order to implement a foolproof preparation plan. The Indian Coast Guard Navik Syllabus and the syllabus for Sections I and II are comparable.
Indian Coast Guard Yantrik Syllabus 2025
| Indian Coast Guard Yantrik Syllabus 2025 |
| Section III |
| Electrical Diploma Engineering |
| Basic concepts – Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units. Circuit law- Kirchhoff‘s law, Simple Circuit solution using network theorems. Magnetic Circuit- Concepts of flux, EMF, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc. Electromagnetic induction, self and mutual induction. AC Fundamentals- Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit. Measurement and measuring instruments- Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges. Use of CRO, Signal Generator, CT, PT and their uses. Earth Fault detection. Electrical Machines- (a) D.C. Machine – Construction, Basic Principles of D.C. motors generators and their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency of D.C. Machines. (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency. Effect of voltage, frequency and wave form on losses. Parallel operation of 1 phase /3 phase transformers. Auto transformers. (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors. Methods of braking, effect of voltage and frequency variation on torque speed characteristics, Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications. Synchronous Machines- Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous motors. Generation, Transmission and Distribution- Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults. Switchgears and Protection-Rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars. Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system. Cable – Different type of cables, cable rating and derating factor. Estimation And Costing- Estimation of lighting scheme, electric installation of machines and relevant IE rules. Earthing practices and IE Rules. Utilization of Electrical Energy- Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors. Basic Electronics- Working of various electronic devices e.g. PN Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using these devices. |
Indian Coast Guard Yantrik Syllabus 2025 – Section IV
| Indian Coast Guard Yantrik Syllabus 2025 |
| Section IV |
| Electronics Diploma Engineering |
| Basic concepts– Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units. Electronic Components & Materials– Conductors, Semi conductor& Insulators; Magnetic materials; Jointing & Cleaning materials for U/G copper cable & OFC; Cells and Batteries (chargeable and non chargeable); Relays, Switches, MCB & Connectors. Electronic Devices and Circuits– PN Junction diodes, thyristor; Diode and triode circuits; Junction Transistors; Amplifiers; Oscillator; Multi vibrator, counters; Rectifiers; Inverter and UPS. Digital Electronics– Number System & Binary codes; Boolean Algebra & Logic gates; Combinational & Sequential logic circuits; A/D & D/A converter, counters; Memories. Linear Integrated Circuit– Introduction to operational Amplifier; Linear applications; Non Linear applications; Voltage regulators; Timers; Phase lock loop. Microprocessor and Microcontroller– Introduction to microprocessor, 8085 microprocessor working; Assembly Language programming; Peripherals & other microprocessors; Microcontrollers. Electronic Measurements– Measuring systems; Basic principles of measurement; Range Extension methods; Cathode ray oscilloscope, LCD, LED panel; Transducers. Communication Engineering– Introduction to communication; Modulation techniques; Multiplexing Techniques; Wave Propagation, Transmission line characteristics, OFC; Fundamentals of Public Address systems, Electronic exchange, Radar, Cellular and Satellite Communication. Data communication and Network- Introduction to data communication; Hardware and interface; Introduction to Networks and Networking devices; Local Area Network and Wide area network; Internet working. Computer Programming– Programming concepts; Fundamentals of ‘C’ and C ++; Operators in ‘C’ and C ++; Control Statements; Functions, Array String & Pointers, File Structure; Data Structure and DBMS. Basic Electrical Engineering– DC Circuits; AC fundamentals; Magnetic, Thermal and Chemical effects of Electric current; Earthing – Installation, Maintenance, Testing. |
Indian Coast Guard Yantrik Syllabus 2025 – Section V
Mechanical Engineering) a)Engineering Mechanics
Resolution of forces, Equilibrium and Equilibrant, parallelogram law of forces, triangle law of forces, polygon law of forces and Lami’s theorem, couple and moment of a couple, condition for equilibrium of rigid body subjected to number of coplanar non-concurrent forces, definition of static friction, dynamic friction, derivation of limiting angle of friction and angle of repose, resolution of forces considering friction when a body moves on horizontal plane and inclined plane, calculation of moment of inertia and radius of gyration of : (a) I-Section (b) channel section (c) T-Section (d) L-Section (Equal & unequal lengths) (e) Z-Section (f) Built up sections (simple cases only), Newton’s laws of motion (without derivation), motion of projectile, D’Alembert’s principle, definition law of conservation of energy, law of conservation of momentum.
Mechanical Engineering) b)Material Science
Mechanical properties of engineering materials – tensile strength, compressive strength, ductility, malleability, hardness, toughness, brittleness, impact strength, fatigue, creep resistance. Classification of steels, mild steel and alloy steels. Importance of heat treatment. Heat treatment processes – annealing, normalizing, hardening, tempering, carburizing, nitriding and cyaniding3Strength of Materials- Stress, strain, stress strain diagram, factor of safety, thermal stresses, strain energy, proof resilience and modules of resilience. Shear force and bending moment diagram – cant leaver beam, simply supported beam, continuous beam, fixed beam. Torsion in shafts and springs, thin cylinder shells.
Mechanical Engineering) c)Machining
Working principle of lathe. Types of lathes – Engine lathe – construction details and specifications. Nomenclature of single point cutting tool, geometry, tool signature, functions of tool angles. General and special operations – (Turning, facing, taper turning thread cutting, knurling, forming, drilling, boring, reaming, key way cutting), cutting fluids, coolants and lubricants. Introduction to shaper, slotter, plainer, broaching, milling and manufacture of gears, heat treatment process applied to gears.
Mechanical Engineering) d)Welding
Welding – Introduction, classification of welding processes, advantages and limitations of welding, principles of arc welding, arc welding equipment, choice of electrodes for different metals, principle of gas (oxy-acetylene) welding, equipment of gas welding, welding procedures (arc & gas), soldering and brazing techniques, types and applications of solders and fluxes, various flame cutting processes, advantages and limitations of flame cutting, defects in welding, testing and inspection modern welding methods, (submerged, CO2, atomic – hydrogen, ultrasonic welding), brief description of MIG & TIG welding.
Mechanical Engineering) e)Grinding & Finishing Process
Principles of metal removal by grinding, abrasives, natural and artificial, bonds and binding processes, vitrified, silicate, shellac rubber, grinding machines, classification: cylindrical, surface, tool & cutter grinding machine, construction details, relative merits, principles of centreless grinding, advantages & limitations of centreless grinding work, holding devices, wheel maintenance, balancing of wheels, coolants used, finishing by grinding, honing, lapping, super finishing, electroplating, basic principles – plating metals, applications, hot dipping, galvanizing tin coating, parkerising, anodizing, metal spraying, wire process, powder process and applications, organic coatings, oil base paint, lacquer base enamels, bituminous paints, rubber base coating.
Mechanical Engineering) f)Metrology
Linear measurement – Slip gauges and dial indicators, angle measurements, bevel protractor, sine bar, angle slip gauges, comparators (a) mechanical (b) electrical (c) optical (d) pneumatic. Measurement of surface roughness; methods of measurements by comparison, tracer instruments and by interferometry, collimators, measuring microscope, interferometer, inspection of machine parts using the concepts of shadow projection and profile projection.
Mechanical Engineering) g)Fluid Mechanics & Hydraulic Machinery
Properties of fluid, density, specific weight, specific gravity, viscosity, surface tension, compressibility capillarity, Pascal’s law, measurement of pressures, concept of buoyancy. Concept of Reynold’s number, pressure, potential and kinetic energy of liquids, total energy, laws of conservation, mass, energy and momentum, velocity of liquids and discharge, Bernoulli’s equation and assumptions, venturimeters, pitottube, current meters. Working principle & constructional details of centrifugal pump, efficiencies – manometric efficiency, volumetric efficiency, mechanical efficiency and overall efficiency, cavitation and its effect, working principle of jet & submersible pumps with line diagrams.
Mechanical Engineering) h)Industrial Management
Job analysis, motivation, different theories, satisfaction, performance reward systems, production, planning and control, relation with other departments, routing, scheduling, dispatching, PERT and CPM, simple problems. Materials in industry, inventory control model, ABC Analysis, Safety stock, re-order, level, economic ordering quantity, break even analysis, stores layout, stores equipment, stores records, purchasing procedures, purchase records, Bin card, Cardex, Material handling, Manual lifting, hoist, cranes, conveyors, trucks, fork trucks.
Mechanical Engineering) i)Thermal Engineering
Laws of thermo dynamics, conversion of heat into work vice versa , laws of perfect gases, thermo dynamic processes – isochoric, isobaric, isothermal hyperbolic, isentropic, polytrophic and throttling, modes of heat transfer, thermal conductivity, convective heat transfer coefficient, Stefan Boltzman law by radiation and overall heat transfer coefficient. Air standards cycles – Carnot cycle, Otto cycle, Diesel cycle, construction and working of internal combustion engines, comparison of diesel engine and petrol engine. Systems of internal combustion engine, performance of internal combustion engines. Air compressors their cycles refrigeration cycles, principle of a refrigeration plant
Also Read: MSBTE Winter Diploma Result 2025 OUT at msbte.ac.in, All details Check Here
Indian Coast Guard Yantrik Exam Pattern 2025
Candidates must understand the specifics of the Indian Coast Guard Yantrik Exam Pattern 2025 in order to sit for the exam. A written test is required for all positions in Section 1, and applicants must appear in Section 1 separately based on the positions they wish to apply for.
| Posts | Written test |
| Navik GD | Section I |
| Navik DB | Section (I+II) |
| Yantric (Electricals) | Section (I+III) |
| Yantrik (Electronic) | Section (I+IV) |
| Yantrik (Mechanical) | Section (I+V) |
